Skip to content
  • Home
  • Vehicle
  • Garage
    • Home
    • Golf VII · 1.2 TSICurrent vehicle

    Vehicles and knowledge

    Vehicles and knowledge

    • Garage
    • Sources
    • Settings
    Volkswagen Golf VII1.2 TSI · 77 kW
    • Engine code CJZA
    • Production 2012–2015
    • 6-speed manual
    • Drivetrain FWD
    • Configuration: VIN decoded
    Engine code CJZAProduction 2012–20156-speed manualDrivetrain FWDConfiguration: VIN decodedConfiguration: VINVIN decoded
    • OverviewOverview
    • PartsParts
    • ProceduresProcedures
    • TorqueTorque
    • FluidsFluids
    • MaintenanceMaintenance
    • DiagnosticsDiagnostics
    • WiringWiring
    • SpecsSpecs
    • BulletinsBulletins
    • LocationsLocations
    • ConnectorsConnectors
    • SourcesSources
    • OverviewOverview
    • PartsParts
    • ProceduresProcedures
    • TorqueTorque
    • FluidsFluids
    • MaintenanceMaintenance
    • DiagnosticsDiagnostics
    • WiringWiring
    • SpecsSpecs
    • BulletinsBulletins
    • LocationsLocations
    • ConnectorsConnectors
    • SourcesSources
    MoreMore
    OverviewOverviewPartsPartsProceduresProceduresTorqueTorqueFluidsFluidsMaintenanceMaintenanceDiagnosticsDiagnosticsWiringWiringSpecsSpecsBulletinsBulletinsLocationsLocationsConnectorsConnectorsSourcesSources
    ExampleExample data, not a real vehicle
    • OverviewOverview
    • PartsParts
    • ProceduresProcedures
    • TorqueTorque
    • FluidsFluids
    • MaintenanceMaintenance
    • DiagnosticsDiagnostics
    • WiringWiring
    • SpecsSpecs
    • BulletinsBulletins
    • LocationsLocations
    • ConnectorsConnectors
    • SourcesSources

    EXAMPLE DATA: not for workshop use

    Printed from Motrix. Every value, tool number and instruction is fictional. Volkswagen Golf VII · 1.2 TSI · 77 kW · engine CJZAExample

    1. Procedures

    Engine oil and filter: change

    Applies to
    AllApplies to CJZA
    Source
    Authority class A · OEM+1
    Revision
    Rev. 05 · 2018-09
    Est. time
    45 min
    Type
    Service
    Steps
    6

    Fictional procedure: every value, tool number and instruction is example data. Never use it on a real vehicle.

    Steps

    0 of 6 done

    Safety & preparation
    1. 1Step 1: Drain the engine oil (current)
    2. 2Step 2: Fit the drain plug
    3. 3Step 3: Remove the oil filter
    4. 4Step 4: Fit the new oil filter
    5. 5Step 5: Refill
    6. 6Step 6: Check for leaks and the level; reset the indicator

    Draining the engine oil, replacing the spin-on oil filter and the drain plug seal, and refilling to the specified level.

    Safety notices 1

    WARNINGHot oil

    Hot engine oil causes burns. Let the engine cool until the oil is warm, not hot, before draining.

    Draining the engine oil, replacing the spin-on oil filter and the drain plug seal, and refilling to the specified level.

    Fictional procedure: every value, tool number and instruction is example data. Never use it on a real vehicle.

    At a glance

    Example

    Tools 3

    Special tools

    • MX-T907Oil filter wrench Cup wrench for the spin-on filter

    Workshop equipment

    • Collecting pan
    • Torque wrench 5–60 Nm

    Parts 2

    • 6
      Z9E 953 885 UQuantity ×1
      Oil filter, position 6 in Oil pump & filter bracketNew part, single use
    • 13
      N Z70 295 12Quantity ×1
      Seal ring, drain plug, position 13 in Oil pump & filter bracketNew part, single use

    Torque references 2

    • Drain plug, oil sump
    • Oil filter (spin-on)

    Fluids 1

    Engine oil

    Specification
    MX-EO 330
    MX-EO 350: LongLife regime only, not modelled
    Viscosity
    5W-40
    Capacity with filter
    4.2 L
    Fluids & capacities

    Source 2

    • Section M-03
    • VW/5G/LUB

    Document revision Rev. 05 · 2018-09

    Related

    • 115Oil pump & filter bracket

    Before you start 0 of 2 checked

    • Vehicle level, on a lift.
    • Engine warm (not hot).

    Procedure 6 steps

    1

    Step 1 of 6 (current): Drain the engine oil

    Done

    Place the collecting pan under the sump. Remove the drain plug 12 and let the oil drain completely.

      Source: Example OEM Service · M-03.1

      2

      Step 2 of 6: Fit the drain plug

      Done

      Fit a NEW seal ring 13 and tighten the drain plug to .

        Source: Example OEM Service · M-03.2

        3

        Step 3 of 6: Remove the oil filter

        Done

        Place the collecting pan under the filter. Unscrew the oil filter 6 with tool MX-T907 and let the residual oil drain. Check that the old seal came off with the filter.

          Source: Example OEM Service · M-03.3

          4

          Step 4 of 6: Fit the new oil filter

          Done

          Wipe the sealing face of the bracket clean. Lightly oil the seal of the new filter, screw it on by hand until the seal makes contact, then tighten it to .

            Source: Example OEM Service · M-03.4

            5

            Step 5 of 6: Refill

            Done

            Fill with engine oil to the specification and capacity on the Fluids page. Run the engine for one minute, switch off, wait three minutes.

              Source: Example OEM Service · M-03.5

              6

              Step 6 of 6: Check for leaks and the level; reset the indicator

              Done

              Check the drain plug and the oil filter for leaks. Check the level on the dipstick and correct it. Reset the service interval display.

                Source: Example OEM Service · M-03.6

                End of procedure · Rev. 05 · 2018-09 · fictional example data

                Sources 4

                • Authority class A · OEMExample OEM Maintenance Tables (fictional)MX-MNT-5G · Rev. 05 · 2018-09 · example.motrix.invalidMarked verified
                • Authority class B · LicensedExample Licensed Technical Data (fictional)MX-TDS-2026.2 · Release 2026.2 · 2026-06 · example.motrix.invalidMarked verified
                • Authority class A · OEMExample OEM Workshop Manual: Engine mechanical (fictional)MX-WSM-5G-EA211 · Rev. 03 · 2019-04 · example.motrix.invalidMarked verified
                • Authority class A · OEMExample OEM Parts Catalogue (fictional)MX-EPC-5G · Data release 20.11 · 2020-11 · example.motrix.invalidMarked verified

                Every source above is a fictional example record. Values in this procedure are example data.

                Sourced99 %