Bulletins
4 bulletins · 2 apply · 1 superseded · 1 to check
| Bulletin no. | Title | Issued | Applies to | Status | Related |
|---|---|---|---|---|---|
| MX-TSB-5G-19-004 | Brakes | PR 1ZECheck applicability | Informational | Front brake pads: replace | |
Summary 288 mm front brake (PR 1ZE): the revised pad set Z9Q 922 047 M with modified shims, released 2019-04, reduces squeal at low speed. Fit it at the next pad replacement.
| |||||
| MX-TSB-5G-16-004 | Engine | CJZAto 2015-08Applies | Active | P0300P0301P0302P16C1 | |
Summary Misfire codes after cold start with no mechanical fault found. Update the engine control software to the example version listed in the bulletin.
| |||||
| MX-TSB-5G-15-007 | Engine | CJZA / CJZBto 2014-10Applies | Active | Toothed belt: removal and installation | |
Summary Replaces MX-TSB-5G-14-011. Vehicles built up to 2014-10: if a chirp or whine from the toothed belt drive is heard in the first seconds after a cold start, check the belt for glazing, the tensioner pointer position and the idler pulley bearing. If confirmed, fit the revised toothed belt Z9E 408 853 R together with a new tensioner pulley and idler pulley.
| |||||
| MX-TSB-5G-14-011 | Engine | CJZA / CJZBto 2014-10 | Supersededby MX-TSB-5G-15-007 | Toothed belt: removal and installation | |
Summary Vehicles built up to 2014-10 may show a brief chirp from the toothed belt area in the first seconds after a cold start. Check the belt for glazing and the tensioner pointer position; if the noise is confirmed, fit the revised toothed belt Z9E 408 853 R together with a new tensioner pulley. Superseded by MX-TSB-5G-15-007. Kept for reference; act on the later bulletin.
| |||||
- MX-TSB-5G-19-004Informational
Issued · Brakes
PR 1ZECheck applicabilityFront brake pads: replaceSummary
288 mm front brake (PR 1ZE): the revised pad set Z9Q 922 047 M with modified shims, released 2019-04, reduces squeal at low speed. Fit it at the next pad replacement.
- Why it is open
- Equipment code 1ZE cannot be confirmed for this vehicle
- Category
- Brakes
- Source
Summary
Misfire codes after cold start with no mechanical fault found. Update the engine control software to the example version listed in the bulletin.
- Why it applies
- Engine CJZA listed
- Built 2013-03: applies up to 2015-08
- Category
- Engine
- Source
- MX-TSB-5G-15-007Active
Issued · Engine
CJZA / CJZBto 2014-10AppliesToothed belt: removal and installationSummary
Replaces MX-TSB-5G-14-011. Vehicles built up to 2014-10: if a chirp or whine from the toothed belt drive is heard in the first seconds after a cold start, check the belt for glazing, the tensioner pointer position and the idler pulley bearing. If confirmed, fit the revised toothed belt Z9E 408 853 R together with a new tensioner pulley and idler pulley.
- Why it applies
- Engine CJZA listed
- Built 2013-03: applies up to 2014-10
- Category
- Engine
- Source
- MX-TSB-5G-14-011Supersededby MX-TSB-5G-15-007
Issued · Engine
CJZA / CJZBto 2014-10Toothed belt: removal and installationSummary
Vehicles built up to 2014-10 may show a brief chirp from the toothed belt area in the first seconds after a cold start. Check the belt for glazing and the tensioner pointer position; if the noise is confirmed, fit the revised toothed belt Z9E 408 853 R together with a new tensioner pulley.
Superseded by MX-TSB-5G-15-007. Kept for reference; act on the later bulletin.
- Why it applies
- Engine CJZA listed
- Built 2013-03: applies up to 2014-10
- Category
- Engine
- Source
Applicability checked againstCJZA · MQ200-6F · built 2013-03 · identified by VIN
Recalls not connected