B0010 · Golf VII · 1.2 TSI

Passenger frontal stage 1 deployment control

CriticalExample

Module: Airbag
Type: Generic (SAE)
Applicability: All configurations
Source: Codes · B0010

Conditions for setting Placeholder: ignition on, fault present for the debounce time.

WARNINGAirbag can deploy

Before you unplug an airbag or clock-spring connector, switch the ignition off, disconnect the battery earth strap and wait at least 2 minutes. Never probe the igniter circuits with a test lamp or an ohmmeter, touch the vehicle body first to discharge static electricity, and put a removed airbag module down with its padded side facing up.

Diagnostic steps

Preliminary checks. There is no guided test for this code in the example data.

Example

Preliminary checks

Read and note all stored codes and freeze-frame data.
Check the relevant connectors and harness visually.
Clear the codes and repeat the conditions for setting.
Work through the possible causes in order.

The related wiring and procedures are listed belowalongside.

Possible causes

In the order the source lists them, with no likelihoods.

Example

Airbag module connector
Wiring fault
Airbag module faulty

B0010, Passenger frontal stage 1 deployment control

Diagnostic steps

Preliminary checks

Possible causes

Fault code

B0010, Passenger frontal stage 1 deployment control

Diagnostic steps

Preliminary checks

Possible causes